MicroCure DTI 002

MicroCure DTI 002MicroCure DTI is a one part room temperature curable hydrophobic and oleophobic nano coating with excellent resistance to solvents and UV light. Substrates for MicroCure include plastic, metal, glass, ceramic and painted surfaces. MicroCure can be applied by draw, dip, spray, roll or brushing. When well cured, contact angles to water greater than 95 and roll off angles of less than 5 can be achieved. MicroCure is water, ice and oil repellent. Size:

Microcure is UV-light resistant and lasts 3 to 5 years in extreme sunlight

Oleophobicity grade: 5-6

and other materials from sticking to laboratory devices

Thin films cure in less than 3 seconds under UV light

Move the spray-gun evenly across the surface covering 6-10 inches per second

MicroCure DTI is a one-part room temperature curable hydrophobic and oleophobic nano-coating with excellent resistance to solvents and UV-light

PFC110 has a boiling point of 110°C

PFC 1601V-FS is a one percent fluoropolymer solution with a fluoro-silane adhesion promoter in a fluorosolvent (BP=160°C) commonly used for electrowetting applications

CytoCure can be applied by dipping

FluorN 561 has a slightly higher fluorine content than FluorN 562

Mineral oil contact angle: over 65°

CytoPel 500M is a fluoropolymer solution with nanoparticles in a non-flammable fluorosolvent (BP=60°C)