PRO-555 Extreme Tack Wallcovering Adhesive

PRO-555 Extreme Tack Wallcovering AdhesiveApplication Instructions Surface Preparation: Surface must be free from grease and other residues, dry, smooth and structurally sound. Check surfaces for paint bonding, loose wallcoverings, damaged wall board or plaster. Repair all unsound surfaces. Before proceeding with any unusual conditions, consult your adhesive or wallcovering supplier. Dilution: Do no dilute. Application Method: Use only when the room temperature is above 50F. Apply an even

loose wallcoverings

Reapply remover as it absorbs

Application Method

apply uniformly

pasting machine

Dilution: May be diluted with up to one pint of clean water per gallon

DO NOT FREEZE

Restrict heavy traffic for 24 hours

For Pre-pasted Wallpaper: Hold spray nozzle 10-12 inches from the wallpaper and apply a generous amount of E-Z Hang to the back of the wallpaper

) One gallon of remover will strip up to 300 square feet of wallpaper

NOTE: The trowel sizes listed are general guidelines based on typical flooring types

Application Temperature: 59°F to 77°F